GehlGehl R135 Skid Loader GEN2
Rated Operating Capacity: 680 kg
Operating weight: 2383 kg
Power: 46 hp
Bucket Hinge Pin Height: 2790 mm
Specifications
Dimensions |
|
|---|---|
| A Overall Operating Height - Fully Raised | 3670 mm |
| B Height to Hinge Pin - Fully Raised | 2790 mm |
| C Overall Height to Top of ROPS | 1930 mm |
| D Overall Length with Bucket | 3073 mm |
| E Dump Angle at Full Height | 40° |
| F Dump Height | 2120 mm |
| G Dump Reach at Full Height | 591 mm |
| J Rollback at Ground | 28° |
| M Rollback Angle at Full Height | 82° |
| O Seat to Ground Height | 871 mm |
| P Wheelbase | 950 mm |
| Q Overall Width - Less Bucket A | 1364 mm |
| R Bucket Width | 1372 mm |
| S Ground Clearance to Chassis | 201 mm |
| V Overall Length - Less Bucket | 2359 mm |
| W Departure Angle | 25° |
| X Clearance Circle – Front w/ Bucket | 1842 mm |
| Y Clearance Circle – Front w/o Bucket | 1120 mm |
| Z Clearance Circle – Rear | 1372 mm |
| Standard Specification Tire Size | 10.00 x 16.5 HD |
Engine |
|
| Make | Yanmar |
| Model | 4TNV88C-KMS Tier IV |
| Gross Power @ 2500 rpm | 34 kW |
| Net Power @ 2500 rpm | 33 kW |
| Maximum Torque | 146 Nm @ 1820 |
| Displacement | 2.19 L |
Hydraulic System |
|
| Auxiliary Hydraulics - Standard | 63.6 L/min |
| High-Flow Auxiliary Hydraulics - Option | N/A |
| Reservoir Capacity | 37.9 L |
Electrical System |
|
| Battery | 950 CCA |
| Starter | 2.3 kW |
| Alternator | 100-amp |
Capacities/Weights |
|
| Rated Operating Capacity B | 612 kg |
| Rated Operating Capacity with Optional Counterweight B | 680 kg |
| Fuel Tank | 59.40 L |
| Travel Speed - Maximum | 12.9 km/hr |
| Travel Speed with Two-Speed Option - Maximum | N/A |
| Operating Weight C - Approximate | 2383 kg |
A - Overall width is dependent upon the amount of wheel offset.
B - Per SAE J818, SAE J732, and ISO 14397
C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.
